AllGrand supplies batteries and battery energy storage systems to distributors, EPC contractors, installers and commercial buyers across the Middle East. This page supports projects in the United Arab Emirates, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Iraq, Jordan and neighbouring markets.
High ambient temperature is a defining design condition. Battery storage sizing must account for temperature derating, thermal management, ventilation, enclosure rating, dust exposure, cycling duty and maintenance access. For C&I and utility projects, the PCS, fire-safety strategy and grid interface also belong in the same specification.
Battery and BESS supply for Middle East projects
- 261 kWh liquid-cooled BESS and 522 kWh liquid-cooled cabinets for commercial and industrial storage.
- 1044 kWh containerised ESS for larger industrial, infrastructure and utility projects.
- 120 kWh high-voltage stacked systems for factories, remote sites, border facilities and islands.
- 12 V gel batteries and 2 V gel banks for solar and standby applications.
- GFM standby batteries and high-rate batteries for UPS, switchgear and data centres.
- Front-terminal batteries for telecom cabinets and rack installations.
Country and project notes
Battery supplier for the UAE and Saudi Arabia
Commercial buildings, industrial facilities, data centres, telecom networks and solar projects require clear technical documentation and coordinated system scopes. Buyers commonly request battery supplier UAE, solar battery supplier Saudi Arabia, BESS supplier Saudi Arabia and industrial battery supplier Middle East. Include the project site, ambient conditions, load profile and required standards in the enquiry.
Battery supplier for Qatar, Kuwait, Oman and Bahrain
High-temperature performance, fire safety, service access and spare-part planning are important for backup and energy-storage systems. For commercial BESS, specify peak kW, usable kWh, desired dispatch profile, PCS arrangement and available equipment footprint.
Battery supplier for Iraq and Jordan
Projects may involve weak-grid or off-grid conditions, telecom sites, industrial backup and solar-hybrid storage. The lower-maintenance requirements of lithium systems or sealed gel batteries can reduce service demands compared with flooded alternatives, subject to the duty cycle and budget.
Application matrix
| Market application | Key requirement | Recommended starting point |
|---|---|---|
| Utility and infrastructure BESS | Scalable energy, liquid cooling and project documentation | 522 kWh or 1044 kWh ESS |
| C&I peak shaving and backup | Load profile, usable energy and PCS interface | 261 kWh cabinet or high-voltage stack |
| Solar and off-grid storage | Daily cycling, autonomy and high temperature | LFP storage or gel cycling batteries |
| Telecom and data centre backup | Rack space, high-rate discharge and long float life | Front-terminal, high-rate or GFM batteries |
| Oil, gas and industrial power | Reliability, service access and replacement planning | Industrial battery range and engineered packs |
High-temperature battery procurement checklist
- Maximum shade-air and enclosure temperature, not only average ambient temperature.
- Required usable kWh after depth of discharge, efficiency, temperature and ageing losses.
- Peak kW, continuous C-rate and duration of discharge.
- Cooling method, ventilation, dust protection and installation clearances.
- Grid code, PCS, EMS, BMS and communication interfaces.
- Fire-safety evidence, alarms and emergency procedures required by the project specification.
- Spare parts, commissioning support and ongoing maintenance responsibilities.
Request a Middle East quotation
Send the destination country, load profile, required autonomy, nominal voltage, maximum ambient temperature and project stage. For BESS, add peak power, usable energy, PCS preference, footprint and fire-safety requirements.
Discuss a Middle East battery or BESS project
Frequently asked questions
Can you supply liquid-cooled BESS for high-temperature sites?
Yes. The cabinet or container specification should be reviewed against site temperature, duty cycle, installation clearances and project-safety requirements.
Can you provide model data and engineering drawings?
Yes. Datasheet, dimensions, technical drawings and test information can be requested for the model and configuration under evaluation.
Do you support tenders and EPC procurement?
Yes. Send the technical schedule and commercial scope so the team can confirm a comparable model, documentation list and quotation basis.